STANDARD TYPE HORIZONTAL MOTORIZED TEST STAND MH2-
|Category:||Load the machine|
◆The MH2 series has three test modes:
Manual speed adjustment, manual setting speed, automatic cycle speed
◆Range: 1000N (about 100kgf) travel: 235mm
◆Functions: can display speed, adjust the limit of stroke left and right, prevent overload setting, timing setting, counting or setting test frequency (Max 65535), etc
◆Optional: encoder, MTA meter (with length), speed change, length control, power control.
◆Application: testing of various materials in 1000N
* a special test system for compression test, tensile test (stretching), volume edge test, stripping test, friction test, etc.
* analyze the breaking point and free fitting of mechanical parts.
◆The motor and controller are all adopted by Japan Oriental motor
The test speed is easy to adjust and dial. Set the resolution:
[10 -20mm/min: 0.5 mm/min]
[20 -100mm/ min: 5mm / min]
[100 -300mm/ min: 10mm / min]
Adjustable speed type: start, measure, return
Three measurement modes
There are three test modes to meet your needs.
Manual mode: move and press the up/down button
Jogging mode: dial (approx: 0.05 mm per turn)
Cycle mode: cycle between travel limit switches
Loop mode allows the number of tests to be set to
Repeat and pause time.
Repeated number of tests: Max . 65535 times the timer
Pause time: up to 99 minutes 59 seconds
Function setting mode
Starting speed, measuring speed, return speed
Pause time, number of cycles, extra configuration mode